Big IR Welding Machine

MSH-IR13073 is an infrared welding machine specification designed in super big measurement which can realize welding to max to 1300*700 (mm). Machine applies servo systems to control the motion of welding tooling. Obit function is designed to allow lower jig extend out through the operation window for ergonomic operation in part loading & unloading.

Machine IR control circuit systems can be applied for hot platen tooling also.

Machine is mostly applied to welding fuel tank or urea tank of truck, conditioner air duct of automotive IP, etc.

---

I. Machine Features:

1. MP Sonic IR control circuit can be applied for both IR welding and hot plate welding;

2. Full servo control for precision welding control;

3. Lower jig bed can be extended out through operation welding for easy parts loading and unloading;

4. Linear way guide with gear enhancing mechanism to ensure motion stability in precision;

5. Auxiliary function to welding tooling, including pneumatic clamps, clips, sliding block, vacuum circuit, etc, for easy operation and complex parts geometric shape design;

6. Multiple safety protection ensure human and equipment safety around;

7. MP Sonic IOS system is designed to machine realize hug multiple function meeting the challenging demand in machine operation and management;

8. MES System with WIFI module realizes network management and remote service.

---

II. Optional Features:

1. Auto Tooling change-over system;

2. SPC.

---

III Benefit:

1. High welding ability, especially can weld parts in challenging measurement;

2. High welding precision control;

3. Reliable machine construction design and manufacturing;

4. Perfect welding result;

5. Easy operation in parts loading & unloading;

6. Multiple function in operation and management;

7. Network management and remote service in quicky and lower cost service.

---

IV. Specification:

1. Electric Source: 380V, 3P, AC, 50/60Hz;

2. Air Source: 0.6~0.8Mpa;

3. Power Consumption: about 47KW;

4. Overall Dimension: L2450*W2100*H2950 (mm);

5. Max Welding Size: L1200*W700（mm);

6. Jig Plate Size: L1300*W750 (mm);

8. Working Environment Temperature: 10~40℃;

9. Working Environment Humidity: 5~80%;

10. Weight: About 5.5T.